Special Balancing Machines Tool Dynamic TD 800
Quality pass
Measuring and compensation of unbalance on 1 and 2 planes
Correction of the unbalance by radial drilling, milling, balancing rings or balancing screws
Comfortable handling via touchscreen
Base made polymer concrete for highest measuring accuracy
Tool Dynamic TD 800
Special Balancing Machines
Your solution for big rotors up to diam. 800 mm

Based on the proven Tool Dynamic balancing technology the Tool Dynamic TD 800 allows balancing big rotors of all kind. Bearing rings, grinding wheels and turbine wheels. With hand tailored clamping adapters you can balance your rotors as easy and quick as usual. The safety hood of the TD 800 is segmented and opens to the side. Thus the rotor is accessible from above and heavy parts can be handled by a crane.

Picture shows TD 800 with optional runout measuring device.
Special Balancing Machines Tool Dynamic TD 800
Description Norm: Value: metric/ inch
Mass (weight) M 674 kg
Spindle speed 100 - 600 U/Min
Measuring accuracy < 0,5 gmm
Power connection 230 / 50 - 60 V / Hz
Power 1,0 kW
Compressed air 5 - 6 bar
Air consumption 30 l/h
Maximum tool length 750 mm
Maximum tool diameter Ø 800 mm
Maximum tool weight G 110 kg
Width B 2000 mm
Height H 1950 mm
Deep T 1020 mm
Equipment
 Highest measuring accuracy due to heavy base
Highest measuring accuracy due to heavy base
 Integrated user interface for easy handling of the machine
Integrated user interface for easy handling of the machine
 Indication of the exact spindle angle position on display
Indication of the exact spindle angle position on display
 Indicates the position of unbalance and correction with a laser
Indicates the position of unbalance and correction with a laser
 Print balancing result on label
Print balancing result on label
 Balancing by drilling radially
Balancing by drilling radially
 Balancing by rings or other movable weights
Balancing by rings or other movable weights
 Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
 Quick and precise measuring of repetition parts (single measuring run)
Quick and precise measuring of repetition parts (single measuring run)
 Measuring and compensation of unbalance in 1 plane (static)
Measuring and compensation of unbalance in 1 plane (static)
 Order no. 80.252.01
Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
Order no. 80.252.01 Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
 Order no. 80.217.00
Turn the spindle on the selected angle position and simplifies exact positioning of spindle
Order no. 80.217.00 Turn the spindle on the selected angle position and simplifies exact positioning of spindle
 Order no. 80.277.00
Storage rack with two integrated drawers for balancing adapters and further accessories
Order no. 80.277.00 Storage rack with two integrated drawers for balancing adapters and further accessories
 Order no. 80.212.00
Milling program allows correction of unbalance via milling
Order no. 80.212.00 Milling program allows correction of unbalance via milling
 Order no. 80.245.06
New software with user-friendly graphical interface and touchscreen-control
Order no. 80.245.06 New software with user-friendly graphical interface and touchscreen-control
 Order no. 80.233.00.4
Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
Order no. 80.233.00.4 Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
 Order no. 80.229.04
Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
Order no. 80.229.04 Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
 Order no. 80.211.03
Second laser for laser marking from top
Order no. 80.211.03 Second laser for laser marking from top
 Languages for user interface for internal display
Languages for user interface for internal display
Equipment options
 Order no. 80.209.00
Enables specification of the specific weight of the rotor to be balanced, if different from stell
Order no. 80.209.00 Enables specification of the specific weight of the rotor to be balanced, if different from stell
 Order no. 80.213.01
Enables balancing of rotors by axial drilling, e. g. for grinding wheels
Order no. 80.213.01 Enables balancing of rotors by axial drilling, e. g. for grinding wheels
 Order no. 80.218.00
Index balancing of rotors which can not be indexed 180° (e. g. PSC)
Order no. 80.218.00 Index balancing of rotors which can not be indexed 180° (e. g. PSC)
 Order no. 80.214.00
Printout of a detailed measuring protocol (balancing certificate)
Order no. 80.214.00 Printout of a detailed measuring protocol (balancing certificate)
 Order no. 80.245.12
User administration with individual allocation of user rights
Order no. 80.245.12 User administration with individual allocation of user rights
 Order no. 80.245.09
Defined areas that are not allowed for the compensation of the unbalance
Order no. 80.245.09 Defined areas that are not allowed for the compensation of the unbalance
 Order no. 80.245.10
Calculation of alternative positions, when proposed position not possible
Order no. 80.245.10 Calculation of alternative positions, when proposed position not possible
 Order no. 80.245.11
Shortened measuring run, if measuring accuracy is sufficient
Order no. 80.245.11 Shortened measuring run, if measuring accuracy is sufficient
 Order no. 80.207.12
Automatic transfer of rotor weight from scale
Order no. 80.207.12 Automatic transfer of rotor weight from scale
 Order no. 80.245.13
Software to export measuring results
Order no. 80.245.13 Software to export measuring results
 Order no. 80.200.02
Customised and related to practice training to enable the full potential of your Tool Dynamic balancing machine
Order no. 80.200.02 Customised and related to practice training to enable the full potential of your Tool Dynamic balancing machine
 Order no. 91.101.24.00
Customised and related to practice training to enable the full potential of your Tool Dynamic TD 800 balancing machine
Order no. 91.101.24.00 Customised and related to practice training to enable the full potential of your Tool Dynamic TD 800 balancing machine
 For the calibration and testing of every balancing machine with the help of a defined mass
For the calibration and testing of every balancing machine with the help of a defined mass
Special Balancing Machines Tool Dynamic TD 800
Quality pass
Measuring and compensation of unbalance on 1 and 2 planes
Correction of the unbalance by radial drilling, milling, balancing rings or balancing screws
Comfortable handling via touchscreen
Base made polymer concrete for highest measuring accuracy
Tool Dynamic TD 800
Special Balancing Machines
Your solution for big rotors up to diam. 800 mm

Based on the proven Tool Dynamic balancing technology the Tool Dynamic TD 800 allows balancing big rotors of all kind. Bearing rings, grinding wheels and turbine wheels. With hand tailored clamping adapters you can balance your rotors as easy and quick as usual. The safety hood of the TD 800 is segmented and opens to the side. Thus the rotor is accessible from above and heavy parts can be handled by a crane.

Picture shows TD 800 with optional runout measuring device.
Special Balancing Machines Tool Dynamic TD 800
Description Norm: Value: metric/ inch
Mass (weight) M 674 kg
Spindle speed 100 - 600 U/Min
Measuring accuracy < 0,5 gmm
Power connection 230 / 50 - 60 V / Hz
Power 1,0 kW
Compressed air 5 - 6 bar
Air consumption 30 l/h
Maximum tool length 750 mm
Maximum tool diameter Ø 800 mm
Maximum tool weight G 110 kg
Width B 2000 mm
Height H 1950 mm
Deep T 1020 mm
Equipment
 Highest measuring accuracy due to heavy base
Highest measuring accuracy due to heavy base
 Integrated user interface for easy handling of the machine
Integrated user interface for easy handling of the machine
 Indication of the exact spindle angle position on display
Indication of the exact spindle angle position on display
 Indicates the position of unbalance and correction with a laser
Indicates the position of unbalance and correction with a laser
 Print balancing result on label
Print balancing result on label
 Balancing by drilling radially
Balancing by drilling radially
 Balancing by rings or other movable weights
Balancing by rings or other movable weights
 Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
 Quick and precise measuring of repetition parts (single measuring run)
Quick and precise measuring of repetition parts (single measuring run)
 Measuring and compensation of unbalance in 1 plane (static)
Measuring and compensation of unbalance in 1 plane (static)
 Order no. 80.252.01
Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
Order no. 80.252.01 Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
 Order no. 80.217.00
Turn the spindle on the selected angle position and simplifies exact positioning of spindle
Order no. 80.217.00 Turn the spindle on the selected angle position and simplifies exact positioning of spindle
 Order no. 80.277.00
Storage rack with two integrated drawers for balancing adapters and further accessories
Order no. 80.277.00 Storage rack with two integrated drawers for balancing adapters and further accessories
 Order no. 80.212.00
Milling program allows correction of unbalance via milling
Order no. 80.212.00 Milling program allows correction of unbalance via milling
 Order no. 80.245.06
New software with user-friendly graphical interface and touchscreen-control
Order no. 80.245.06 New software with user-friendly graphical interface and touchscreen-control
 Order no. 80.233.00.4
Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
Order no. 80.233.00.4 Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
 Order no. 80.229.04
Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
Order no. 80.229.04 Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
 Order no. 80.211.03
Second laser for laser marking from top
Order no. 80.211.03 Second laser for laser marking from top
 Languages for user interface for internal display
Languages for user interface for internal display
Equipment options
 Order no. 80.209.00
Enables specification of the specific weight of the rotor to be balanced, if different from stell
Order no. 80.209.00 Enables specification of the specific weight of the rotor to be balanced, if different from stell
 Order no. 80.213.01
Enables balancing of rotors by axial drilling, e. g. for grinding wheels
Order no. 80.213.01 Enables balancing of rotors by axial drilling, e. g. for grinding wheels
 Order no. 80.218.00
Index balancing of rotors which can not be indexed 180° (e. g. PSC)
Order no. 80.218.00 Index balancing of rotors which can not be indexed 180° (e. g. PSC)
 Order no. 80.214.00
Printout of a detailed measuring protocol (balancing certificate)
Order no. 80.214.00 Printout of a detailed measuring protocol (balancing certificate)
 Order no. 80.245.12
User administration with individual allocation of user rights
Order no. 80.245.12 User administration with individual allocation of user rights
 Order no. 80.245.09
Defined areas that are not allowed for the compensation of the unbalance
Order no. 80.245.09 Defined areas that are not allowed for the compensation of the unbalance
 Order no. 80.245.10
Calculation of alternative positions, when proposed position not possible
Order no. 80.245.10 Calculation of alternative positions, when proposed position not possible
 Order no. 80.245.11
Shortened measuring run, if measuring accuracy is sufficient
Order no. 80.245.11 Shortened measuring run, if measuring accuracy is sufficient
 Order no. 80.207.12
Automatic transfer of rotor weight from scale
Order no. 80.207.12 Automatic transfer of rotor weight from scale
 Order no. 80.245.13
Software to export measuring results
Order no. 80.245.13 Software to export measuring results
 Order no. 80.200.02
Customised and related to practice training to enable the full potential of your Tool Dynamic balancing machine
Order no. 80.200.02 Customised and related to practice training to enable the full potential of your Tool Dynamic balancing machine
 Order no. 91.101.24.00
Customised and related to practice training to enable the full potential of your Tool Dynamic TD 800 balancing machine
Order no. 91.101.24.00 Customised and related to practice training to enable the full potential of your Tool Dynamic TD 800 balancing machine
 For the calibration and testing of every balancing machine with the help of a defined mass
For the calibration and testing of every balancing machine with the help of a defined mass
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter