Balancing Machine Tool Dynamic TD Economic
Quality pass
Measuring and compensation of unbalance on 1 plane
Correction of the unbalance by radial drilling or balancing rings
Menu-based handling via integrated user interface and display
Base made polymer concrete for highest measuring accuracy

Balancing machine to balance tool holders on 1 plane.

The Tool Dynamic TD Economic is your start into the modular balancing system of the Tool Dynamic series. The TD Economic measures and compensates the unbalance in one plane (static). Therefore it is perfect for balancing short tool holders and tools because of the couple unbalance being very low. The device is operated via the integrated keyboard and screen.

Balancing Machine Tool Dynamic TD Economic
asset-120007-24263
Description Norm: Value: metric/ inch
Mass (weight) M 450 kg
Spindle speed 300 - 1100 U/Min
Measuring accuracy < 0,5 gmm
Power connection 230 / 50 - 60 V / Hz
Power 0,4 kW
Compressed air 6 bar
Maximum tool length 400 mm
Maximum tool diameter Ø 380 mm
Maximum tool weight G 30 kg
Maximum tool length (upon request) 700 mm
Width B 500 mm
Height H 1500 mm
Deep T 820 mm
Equipment
 Highest measuring accuracy due to heavy base
Highest measuring accuracy due to heavy base
 Integrated user interface for easy handling of the machine
Integrated user interface for easy handling of the machine
 Indication of the exact spindle angle position on display
Indication of the exact spindle angle position on display
 Indicates the position of unbalance and correction with a laser
Indicates the position of unbalance and correction with a laser
 Balancing by drilling radially
Balancing by drilling radially
 Balancing by rings or other movable weights
Balancing by rings or other movable weights
 Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
 Quick and precise measuring of repetition parts (single measuring run)
Quick and precise measuring of repetition parts (single measuring run)
 Measuring and compensation of unbalance in 1 plane (static)
Measuring and compensation of unbalance in 1 plane (static)
 Languages for user interface for internal display
Languages for user interface for internal display
Equipment options
 Order no. 80.252.01
Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
Order no. 80.252.01 Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
 Order no. 80.202.00
Enables balancing at predefined positions, e. g. with balancing screws
Order no. 80.202.00 Enables balancing at predefined positions, e. g. with balancing screws
 Order no. 80.217.00
Turn the spindle on the selected angle position and simplifies exact positioning of spindle
Order no. 80.217.00 Turn the spindle on the selected angle position and simplifies exact positioning of spindle
 Order no. 80.277.00
Storage rack with two integrated drawers for balancing adapters and further accessories
Order no. 80.277.00 Storage rack with two integrated drawers for balancing adapters and further accessories
 Order no. 80.212.00
Milling program allows correction of unbalance via milling
Order no. 80.212.00 Milling program allows correction of unbalance via milling
 Order no. 80.245.06
New software with user-friendly graphical interface and touchscreen-control
Order no. 80.245.06 New software with user-friendly graphical interface and touchscreen-control
 Order no. 80.228.03
Comfortable tray to place PC-screen and keyboard
Order no. 80.228.03 Comfortable tray to place PC-screen and keyboard
 Order no. 80.228.02.01
Optional desk for printer
Order no. 80.228.02.01 Optional desk for printer
 Order no. 80.228.02.02.3
Optional holder for external PC (Requires screen holders 80.228.03)
Order no. 80.228.02.02.3 Optional holder for external PC (Requires screen holders 80.228.03)
 Order no. 80.228.02.04.3 Optional desk for tool scale
Order no. 80.228.02.04.3 Optional desk for tool scale
 Order no. 80.233.00.4
Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
Order no. 80.233.00.4 Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
 Order no. 80.229.02
Comfortable usage via keyboard, mouse)
Order no. 80.229.02 Comfortable usage via keyboard, mouse)
 Order no. 80.229.04
Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
Order no. 80.229.04 Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
 Order no. 80.209.00
Enables specification of the specific weight of the rotor to be balanced, if different from stell
Order no. 80.209.00 Enables specification of the specific weight of the rotor to be balanced, if different from stell
 Order no. 80.213.01
Enables balancing of rotors by axial drilling, e. g. for grinding wheels
Order no. 80.213.01 Enables balancing of rotors by axial drilling, e. g. for grinding wheels
 Order no. 80.218.00
Index balancing of rotors which can not be indexed 180° (e. g. PSC)
Order no. 80.218.00 Index balancing of rotors which can not be indexed 180° (e. g. PSC)
 Order no. 80.214.00
Printout of a detailed measuring protocol (balancing certificate)
Order no. 80.214.00 Printout of a detailed measuring protocol (balancing certificate)
 Order no. 80.232.01
Safety hood for extra long toolholders with max. 700 mm length and max. 400 mm diam. (With second laser marking from top)
Order no. 80.232.01 Safety hood for extra long toolholders with max. 700 mm length and max. 400 mm diam. (With second laser marking from top)
 Order no. 80.232.02
Safety hood for extra long toolholders with max. 700 mm length and max. 425 mm diam. (With second laser marking from top)
Order no. 80.232.02 Safety hood for extra long toolholders with max. 700 mm length and max. 425 mm diam. (With second laser marking from top)
 Order no. 91.101.22.00
Customised and related to practice training to enable the full potential of your Tool Dynamic TD ECO/Comfort balancing machine
Order no. 91.101.22.00 Customised and related to practice training to enable the full potential of your Tool Dynamic TD ECO/Comfort balancing machine
 For the calibration and testing of every balancing machine with the help of a defined mass
For the calibration and testing of every balancing machine with the help of a defined mass
Balancing Machine Tool Dynamic TD Economic
Quality pass
Measuring and compensation of unbalance on 1 plane
Correction of the unbalance by radial drilling or balancing rings
Menu-based handling via integrated user interface and display
Base made polymer concrete for highest measuring accuracy

Balancing machine to balance tool holders on 1 plane.

The Tool Dynamic TD Economic is your start into the modular balancing system of the Tool Dynamic series. The TD Economic measures and compensates the unbalance in one plane (static). Therefore it is perfect for balancing short tool holders and tools because of the couple unbalance being very low. The device is operated via the integrated keyboard and screen.

Balancing Machine Tool Dynamic TD Economic
asset-120007-24263
Description Norm: Value: metric/ inch
Mass (weight) M 450 kg
Spindle speed 300 - 1100 U/Min
Measuring accuracy < 0,5 gmm
Power connection 230 / 50 - 60 V / Hz
Power 0,4 kW
Compressed air 6 bar
Maximum tool length 400 mm
Maximum tool diameter Ø 380 mm
Maximum tool weight G 30 kg
Maximum tool length (upon request) 700 mm
Width B 500 mm
Height H 1500 mm
Deep T 820 mm
Equipment
 Highest measuring accuracy due to heavy base
Highest measuring accuracy due to heavy base
 Integrated user interface for easy handling of the machine
Integrated user interface for easy handling of the machine
 Indication of the exact spindle angle position on display
Indication of the exact spindle angle position on display
 Indicates the position of unbalance and correction with a laser
Indicates the position of unbalance and correction with a laser
 Balancing by drilling radially
Balancing by drilling radially
 Balancing by rings or other movable weights
Balancing by rings or other movable weights
 Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
Compensation of measuring errors by index balancing (2 measuring runs, indexing angle 180°)
 Quick and precise measuring of repetition parts (single measuring run)
Quick and precise measuring of repetition parts (single measuring run)
 Measuring and compensation of unbalance in 1 plane (static)
Measuring and compensation of unbalance in 1 plane (static)
 Languages for user interface for internal display
Languages for user interface for internal display
Equipment options
 Order no. 80.252.01
Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
Order no. 80.252.01 Measuring and compensation of unbalance in 2 planes (dynamic unbalance)
 Order no. 80.202.00
Enables balancing at predefined positions, e. g. with balancing screws
Order no. 80.202.00 Enables balancing at predefined positions, e. g. with balancing screws
 Order no. 80.217.00
Turn the spindle on the selected angle position and simplifies exact positioning of spindle
Order no. 80.217.00 Turn the spindle on the selected angle position and simplifies exact positioning of spindle
 Order no. 80.277.00
Storage rack with two integrated drawers for balancing adapters and further accessories
Order no. 80.277.00 Storage rack with two integrated drawers for balancing adapters and further accessories
 Order no. 80.212.00
Milling program allows correction of unbalance via milling
Order no. 80.212.00 Milling program allows correction of unbalance via milling
 Order no. 80.245.06
New software with user-friendly graphical interface and touchscreen-control
Order no. 80.245.06 New software with user-friendly graphical interface and touchscreen-control
 Order no. 80.228.03
Comfortable tray to place PC-screen and keyboard
Order no. 80.228.03 Comfortable tray to place PC-screen and keyboard
 Order no. 80.228.02.01
Optional desk for printer
Order no. 80.228.02.01 Optional desk for printer
 Order no. 80.228.02.02.3
Optional holder for external PC (Requires screen holders 80.228.03)
Order no. 80.228.02.02.3 Optional holder for external PC (Requires screen holders 80.228.03)
 Order no. 80.228.02.04.3 Optional desk for tool scale
Order no. 80.228.02.04.3 Optional desk for tool scale
 Order no. 80.233.00.4
Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
Order no. 80.233.00.4 Console for storage of touchscreen, keyboard, mouse, printer, and further accessories
 Order no. 80.229.02
Comfortable usage via keyboard, mouse)
Order no. 80.229.02 Comfortable usage via keyboard, mouse)
 Order no. 80.229.04
Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
Order no. 80.229.04 Package for comfortable usage via touchscreen for integrated PC (includes sophisticated 19″ touchscreen, keyboard, mouse).
 Order no. 80.209.00
Enables specification of the specific weight of the rotor to be balanced, if different from stell
Order no. 80.209.00 Enables specification of the specific weight of the rotor to be balanced, if different from stell
 Order no. 80.213.01
Enables balancing of rotors by axial drilling, e. g. for grinding wheels
Order no. 80.213.01 Enables balancing of rotors by axial drilling, e. g. for grinding wheels
 Order no. 80.218.00
Index balancing of rotors which can not be indexed 180° (e. g. PSC)
Order no. 80.218.00 Index balancing of rotors which can not be indexed 180° (e. g. PSC)
 Order no. 80.214.00
Printout of a detailed measuring protocol (balancing certificate)
Order no. 80.214.00 Printout of a detailed measuring protocol (balancing certificate)
 Order no. 80.232.01
Safety hood for extra long toolholders with max. 700 mm length and max. 400 mm diam. (With second laser marking from top)
Order no. 80.232.01 Safety hood for extra long toolholders with max. 700 mm length and max. 400 mm diam. (With second laser marking from top)
 Order no. 80.232.02
Safety hood for extra long toolholders with max. 700 mm length and max. 425 mm diam. (With second laser marking from top)
Order no. 80.232.02 Safety hood for extra long toolholders with max. 700 mm length and max. 425 mm diam. (With second laser marking from top)
 Order no. 91.101.22.00
Customised and related to practice training to enable the full potential of your Tool Dynamic TD ECO/Comfort balancing machine
Order no. 91.101.22.00 Customised and related to practice training to enable the full potential of your Tool Dynamic TD ECO/Comfort balancing machine
 For the calibration and testing of every balancing machine with the help of a defined mass
For the calibration and testing of every balancing machine with the help of a defined mass
Haimer Care
Haimer Care
The quality at Haimer is not only by the product, but also by the accompanying services.

Scope of service
  • Early wear detection 
  • Preservation of the target condition 
  • High availability of HAIMER specialists 
  • Consistent quality level 
  • Prerequisite for certification according to ISO 9001
Haimer care in detail

Call us

Headquarters Igenhausen

+49-8257-99880

Open: 8:00 - 18:00 

Write to us

fast and easy

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Write to us

Sales contact

Find us here

Do you have questions about HAIMER, would you like more information about our products or an individual offer?

Sales contact

Newsletter

stay updated

You want to get the most important HAIMER news directly to your inbox? You have come to the right place.

Subscribe to the newsletter